MINERAL-BASED MAGNETIC NANOCOMPOSITE SORBENTS

Authors

  • T. Dontsova National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Ukraine
  • L. Yanushevska National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Ukraine

DOI:

https://doi.org/10.20535/2218-93002612020199286

Keywords:

saponite, magnetic mineral sorbents, nanocomposites, acid-base properties, sorption, dyes.

Abstract

The article is devoted to the synthesis of mineral-based magnetic nanocomposite sorbents and the study of the influence of modification by magnetite and molybdenum disulfide on the structural-sorption and surface properties of native saponite clay. Modification of native saponite clay with nanoscale magnetite increases the specific surface area and changes pore’s distribution of the original clay from monomodal to bimodal. Next modification of magnetic saponite by micro-sized and nano-sized molybdenum disulfide results in blocking of the secondary porous structure (bimodality disappears of magnetic saponite), but it is increasing the specific surface area. It was found that the sorption activity of modified and unmodified saponite in the region of low concentrations of cationic and anionic dyes (Methyl blue and Congo red) is almost the same. The study of Congo red dye adsorption from highly concentrated solutions showed significant differences in the sorption activities of modified and unmodified saponite samples: the largest sorption capacity characteristic of ternary composites (saponite modified by magnetite and by nano-sized molybdenum disulfide). These ternary composites had in 62 times more activity than native saponite clay and 10 times more than magnetic saponite. It is established that all the samples are characterized by basic properties, but the sample of native saponite modified by magnetite and nano-sized molybdenum disulfide has the largest number of active centers (both acidic and basic character). Thus, it is shown that the modification of the native saponite clay significantly affects not only the texture-sorption but also the surface properties of the native saponite clay.

References

Polyakov, V.E.; Tarasevich, Yu.I. Ion Exchange Equilibriums Involving Singly Charged Cations on Saponite. Khimiya i Tekhnologiya Vody, 2012, 34(1), 18–27.

Murray, H.H. Occurrences, Processing and Application of Kaolins, Bentonites, Palygorskite-Sepiolite, and Common Clays. Applied Clay Mineralogy, Amsterdam; Boston: Elsevier, 2007. https://doi.org/10.1016/s1572-4352(06)x0200-3.

Mykhailenko, N.; Makarchuk, O.; Dontsova, T.; et al. Purification of aqeous media by magnetically operated saponite sorbents. Eastern-European Journal of Enterprise Technologies, 4(10), 2015, 13–20. https://doi.org/10.15587/1729-4061.2015.46573.

Macblek, F.A.; Bartol P. Magnetic Sorbent for Radiocesium and Radiostrontium Removal from Clay and Soil Suspensions. J. Radioanalytical and Nucl. Chem. 246(3), 2000, 565–569. https://doi.org/10.1023/A:1006740922917.

Liansheng W.; Yuanlv Y.; Fuqiang L.; et al. Organo-bentonite-Fe3O4 poly(sodium acrylate) magnetic superabsorbent nanocomposite: Synthesis, characterization, and Thorium(IV) adsorption. Applied Clay Science, 83-84, 2018, 405–414. https://doi.org/10.1016/j.clay.2013.07.012.

Saeedeh H.; Hossein S.; Saeedeh R. Adsorption of Cobalt(II) from Aqueous Solutions by Fe3O4/Bentonite Nanocomposite. Water, Air, & Soil Pollution, 226, 2014, 2212–2219. https://doi.org/10.1007/s11270-014-2212-6.

Fatemeh A.; Hossein E. Chemically modified bentonite/Fe3O4 nanocomposite for Pb(II), Cd(II), and Ni(II) removal from synthetic wastewater. Powder Technology, 110, 2018, 154–167. https://doi.org/10.5004/dwt.2018.22228.

Dontsova, T.A.; Yanushevskaya, E.I.; Nahirniak, S.V.; et al. Directional control of the structural adsorption properties of clays by magnetite modification. Journal of Nanomaterials, 2018(Article ID 6573016), 2018, 1–9. https://doi.org/10.1155/2018/6573016.

Makarchuk, O.; Dontsova, T.; Perekos, A. Magnetic nanocomposite sorbents on mineral base. Springer Proceedings in Physics, 195, 2017, 705–719. https://doi.org/10.1007/978-3-319-56422-7_54.

Kumaresan, S. & Radheshyam, R. P. Synthesis of saponite based nanocomposites to improve the controlled oral drug release of model drug quinine hydrochloride dihydrate. Pharmaceuticals, 2019, https://doi.org/10.3390/ph12030105.

Chanturiya, Valentine A. & Minenko, Vladimir G. Advanced techniques of saponite recovery from diamond processing plant water and areas of saponite application. Minerals, 2018, https://doi:10.3390/min8120549.

Hashem F.S. Adsorption of Methylene Blue from Aqueous Solutions using Fe3O4/Bentonite Nanocomposite. Scientific reports, 1 (Article ID 549), 2012, 1−5. https://doi.org/10.4172/scientificreports.549.

Thommes M.; Kaneko K.; Neimark A.V.; et al. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure and Applied Chemistry, 87(9-10), 2015, 1051–1069. https://doi.org/10.1515/pac-2014-1117.

Downloads

Published

2020-03-24

Issue

Section

Статті